壳芯机如果要发挥最佳效果的话，就需要掌握壳芯机的使用方式和了解正确的壳芯机的操作流程，具体如下：

If the shell core machine is to give full play to its best results, it is necessary to master the way of using the shell core machine and understand the correct operation process of the shell core machine.

1、检查传动链条的松紧度是否适中，如过紧或过松，应予调整。

1, check whether the tightness of the transmission chain is moderate, if it is too tight or too loose, it should be adjusted.

2、接通电源，拧开压缩空气伐门，先有手动方法，对各机构逐个点动试车，然后用自动方法，进行一个循环试车，确认一切正常后，方可进行生产。

2, connect the power supply, unscrew the compressed air cutting door, first manual method, the various agencies to move the test by one by one, and then use the automatic method, a cycle test, confirm all normal, can be produced.

3、设备开动后，一个循环未完成时，不许中途调整电器，以免产生误动作，造成设备人身事故。

3, when the equipment is running, when a cycle is not completed, it is not allowed to adjust the appliance halfway, so as to avoid misoperation and cause equipment accident.

4、设备每运转一个循环之后，必须用喷咀将芯盒上的残存砂子吹去。

4, after each operation of a cycle, the nozzle must be used to blow away the remaining sand on the core box.

5、如果用手操作，不准同时操作两个以上电器开关。

5, if you operate with your hands, you must not operate more than two electrical switches at the same time.

6、在工间休息时，必须将煤气关小，以免烧坏芯盒。

6. During the rest time, the gas must be turned off to avoid damaging the core box.